Fauceture

Victorian VPB33088ST 30-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Brushed Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. The pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 65.53 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 32-15/16" (837 mm) Overall dimensions: (L)29-15/16" x (W)21-5/8" x (H)34-3/8" Bowl dimensions: (L)19-11/16" x (W)13-3/4" x (D)7-1/16" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6008 , KB3008 , KB5008 , KB6008 , KB8108 , KBT2128 Extension Legs: VPBL314888 , VPBL514888 Plumbing Trim Kits: KPK108P P-Traps: CC1188 , CC2188 , CC5188 , CC6188 , CC7188 , CC8148 , CC9188 , DD8108 , DD8408 Tailpieces: EVP1008

Victorian VPB33083ST 30-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Antique Brass With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. The pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 65.53 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 32-15/16" (837 mm) Overall dimensions: (L)29-15/16" x (W)21-5/8" x (H)34-3/8" Bowl dimensions: (L)19-11/16" x (W)13-3/4" x (D)7-1/16" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6003 , KB3003 , KB5003 , KB6003 , KB8103 , KBT2123 Plumbing Trim Kits: KPK103P P-Traps: CC1183 , CC2183 , CC5183 , CC6183 , CC7183 , CC8143 , CC9183 , DD8103 Tailpieces: EVP1003

Templeton KVBH312276 31-Inch Ceramic Console Sink with Brass Legs (1-Hole), White/Polished Nickel With a beautiful ceramic countertop, this console sink set is a long-lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops, like the LBT-series top in this listing, are finished with a glossy glaze on the top and sink basin interior, creating a pristine, stain-resistant surface and a glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished but coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides due to the nature of the ceramic material, as a minimum surface area must remain raw during the glaze firing process to prevent explosions. For your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and faucet are sold separately. Features Item weight: 56.91 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH312278 31-Inch Ceramic Console Sink with Brass Legs (1-Hole), White/Brushed Nickel With a beautiful ceramic countertop, this console sink set is a long-lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops, like the LBT-series top in this listing, are finished with a glossy glaze on the top and sink basin interior, creating a pristine, stain-resistant surface and a glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished but coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides due to the nature of the ceramic material, as a minimum surface area must remain raw during the glaze firing process to prevent explosions. For your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and faucet are sold separately. Features Item weight: 56.91 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28188 Drains: EV6008 , KB3008 , KB5008 , KB6008 , KB8108 , KBT2128 Overflow Covers: EVF1118 Plumbing Trim Kits: KPK108P P-Traps: CC1188 , CC2188 , CC5188 , CC6188 , CC7188 , CC8148 , CC9188 , DD8108 , DD8408 Tailpieces: EVP1008

Templeton KVBH312270 31-Inch Ceramic Console Sink with Brass Legs (1-Hole), White/Matte Black With a beautiful ceramic countertop, this console sink set is a long-lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops, like the LBT-series top in this listing, are finished with a glossy glaze on the top and sink basin interior, creating a pristine, stain-resistant surface and a glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished but coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides due to the nature of the ceramic material, as a minimum surface area must remain raw during the glaze firing process to prevent explosions. For your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and faucet are sold separately. Features Item weight: 56.91 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28180 Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000

Templeton KVBH312271 31-Inch Ceramic Console Sink with Brass Legs (1-Hole), White/Polished Chrome With a beautiful ceramic countertop, this console sink set is a long-lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops, like the LBT-series top in this listing, are finished with a glossy glaze on the top and sink basin interior, creating a pristine, stain-resistant surface and a glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished but coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides due to the nature of the ceramic material, as a minimum surface area must remain raw during the glaze firing process to prevent explosions. For your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and faucet are sold separately. Features Item weight: 56.91 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28181 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton KVBH312275 31-Inch Ceramic Console Sink with Brass Legs (1-Hole), White/Oil Rubbed Bronze With a beautiful ceramic countertop, this console sink set is a long-lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops, like the LBT-series top in this listing, are finished with a glossy glaze on the top and sink basin interior, creating a pristine, stain-resistant surface and a glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished but coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides due to the nature of the ceramic material, as a minimum surface area must remain raw during the glaze firing process to prevent explosions. For your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and faucet are sold separately. Features Item weight: 56.91 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28185 Drains: EV6005 , KB3005 , KB5005 , KB6005 , KB8105 , KBT2125 Overflow Covers: EVF1115 Plumbing Trim Kits: KPK105P P-Traps: CC1185 , CC2185 , CC5185 , CC6185 , CC7185 , CC9185 Tailpieces: EVP1005

Templeton KVBH312277 31-Inch Ceramic Console Sink with Brass Legs (1-Hole), White/Brushed Brass With a beautiful ceramic countertop, this console sink set is a long-lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops, like the LBT-series top in this listing, are finished with a glossy glaze on the top and sink basin interior, creating a pristine, stain-resistant surface and a glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished but coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides due to the nature of the ceramic material, as a minimum surface area must remain raw during the glaze firing process to prevent explosions. For your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and faucet are sold separately. Features Item weight: 56.91 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton KVBH25227W8B1 25-Inch Ceramic Console Sink with Brass Legs (8-Inch, 3-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.09 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB20181 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton KVBH25227W8B5 25-Inch Ceramic Console Sink with Brass Legs (8-Inch, 3-Hole), White/Oil Rubbed Bronze With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.09 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB20185 Drains: EV6005 , KB3005 , KB5005 , KB6005 , KB8105 , KBT2125 Overflow Covers: EVF1115 Plumbing Trim Kits: KPK105P P-Traps: CC1185 , CC2185 , CC5185 , CC6185 , CC7185 , CC9185 Tailpieces: EVP1005

Templeton KVBH25227W8B6 25-Inch Ceramic Console Sink with Brass Legs (8-Inch, 3-Hole), White/Polished Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.09 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB20186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH3622M85 36-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Oil Rubbed Bronze With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 88.86 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)37-7/8" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28185 Drains: EV6005 , KB3005 , KB5005 , KB6005 , KB8105 , KBT2125 Overflow Covers: EVF1115 Plumbing Trim Kits: KPK105P P-Traps: CC1185 , CC2185 , CC5185 , CC6185 , CC7185 , CC9185 Tailpieces: EVP1005

Templeton KVBH3622M86 36-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 88.86 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)37-7/8" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH3622M81 36-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Chrome With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 88.86 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)37-7/8" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28181 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton KVBH3022M86 30-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 76.98 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)37-7/8" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB20186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Pemberton LMS3630MBSQ6 36-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 87.76 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)35-3/16" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4-1/2" x (T)11/16" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH37227W4PN 37-Inch Ceramic Console Sink with Brass Legs (4-Inch, 3-Hole), White/Polished Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 62.4 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 3-hole for 4" centerset or mini-widespread faucet design Includes integral rectangular lavatory bowl Minimum cabinet size: 40-3/8" Overall dimensions: (L)37-3/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/2" x (W)12-5/8" x (D)5-5/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH25227W4B6 25-Inch Ceramic Console Sink with Brass Legs (4-Inch, 3-Hole), White/Polished Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.09 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 3-hole for 4" centerset or mini-widespread faucet design Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB20186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH37227W8PN 37-Inch Ceramic Console Sink with Brass Legs (8-Inch, 3-Hole), White/Polished Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 65.75 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 40-3/8" Overall dimensions: (L)37-3/8" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/2" x (W)12-5/8" x (D)5-5/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Pemberton LMS36MB6 36-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 87.98 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)38-7/16" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4-1/2" x (T)11/16" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Pemberton LMS36MBSQ6 36-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 87.98 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)38-7/16" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4-1/2" x (T)11/16" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH252276 25-Inch Ceramic Console Sink with Brass Legs (1-Hole), White/Polished Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.09 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)33-15/16" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB20186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Edwardian KVPB1917M346ST 19-Inch Carrara Marble Console Sink with Brass Legs (4-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 49.83 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole for 4" centerset or mini-widespread faucet design Includes integral oval lavatory bowl Minimum cabinet size: 22" Overall dimensions: (L)19" x (W)17" x (H)37-3/4" Bowl dimensions: (L)10-13/16" x (W)9-1/16" x (D)5-1/2" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)19" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6006 , KB1006 , KB1116 , KB2006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVBH3622M8SQ6 36-Inch Carrara Marble Console Sink with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 84.45 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)37-7/8" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VBHSB28186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006