All Products

Templeton KVPB30MBSQ7 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton KVPB3030MB7 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.04 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)34-3/4" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton KVPB30MB7 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton VBH282033SB Brass Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Templeton 24 inch console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features High quality brass construction to give you long lasting durability Overall dimensions: (L)24" x (W)20-3/8" x (H)33-1/4" 1-1/2" (38mm) OD brass tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ

Templeton VPB1377ST 37-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Brushed Brass With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. The pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 73.1 lbs. Fabricated from high quality vitreous china Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 40-3/8" Overall dimensions: (L)37-3/8" x (W)21-5/8" x (H)32-1/8" Bowl dimensions: (L)17-5/16" x (W)13" x (D)7-1/16" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Front overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB1007SB , KB1117 , KB2007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Extension Legs: VPBL314887 , VPBL514887 Mounting Brackets: VSPLBRKT Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton KVPB36MB7 36-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 90.18 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)38" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton KS7808TPLBS Single-Handle 3-Hole Widespread Kitchen Faucet with Brass Sprayer, Brushed Nickel This faucet is the perfect embodiment of the traditional portrait of early American stylings. Able to fit a variety of sink set-ups, widespread kitchen faucets can be utilized in several multi-hole configurations. These are ideal for larger kitchens, as they are more spread apart, and with the included side-sprayer feature a 3-hole installation. The brushed nickel finish will also provide a long lasting and warm touch to your kitchen ensemble. Allow the brass construction to provide a sturdy and reliant fixture. ADA compliance for faucets ensures accessibility for individuals with disabilities. Faucets must be designed for easy operation by persons with mobility issues, featuring lever handles that require minimal effort to turn on and off. These elements promote independence and safety, allowing individuals with mobility impairments to use the faucets with ease and dignity, in line with the Americans with Disabilities Act (ADA). Features Solid brass construction for durability Deck mount 3-hole installation Drip-free ceramic disc cartridge 1/2-14 NPSM connection 1.8 GPM/6.8 LPM spout flow rate at 60 PSI 9-7/8" spout reach 9-1/4" spout clearance 12" spout height High-arc gooseneck spout Single lever handle meets ADA guidelines Swivel spout for maximum clearance and versitility Includes brass side sprayer with 60" hose Downloads Specification Sheet Parts Diagram Installation Guide Repair Instruction Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Aerators: A556427UNSK8

Templeton KVPB30MBS Marble Vanity Top Backsplash, Carrara White Built from a stunning marble for long-lasting durability, the Templeton 30 in. Carrara marble vanity top backsplash offers elegant and transitional stylings. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Available in differing lengths, this vanity top backsplash in particular features dimensions of 30 inch (L) x 3/4 inch (W) x 4 inch (H). Pair this top with console legs, available in a variety of finishes. Kingston's carrara marble is polished, but it is not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the surface after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Fabricated from solid marble Fits directly on most standard 30" vanity cabinet For installation onto select vanity sinks-check model for compatibility Overall dimensions: (L)30" x (W)4" x (T)3/4" Downloads Specification Sheet Installation Guide

Templeton VPB1378B 37-Inch Ceramic Console Sink (8-Inch, 3-Hole), White Kingston Brass' Templeton Collection is the perfect embodiment of the traditional portrait and contemporary technology with its extensive line of vanity consoles and bathroom fixtures. This console sink top in particular features overall dimensions of (L)37-3/8" x (W)21-5/8" x (H)8-7/8" with pre-drilled 3-hole for faucet installation. Built from a stunning ceramic for long-lasting durability, the Templeton ceramic console sink Bowl offers elegant and transitional stylings. Also for your convenience, an oval ceramic undermount sink is attached to the ceramic countertop. Its pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Pair this console top with console legs, available in a variety of finishes. Features Item weight: 62 lbs. Fabricated from ceramic material for an everlasting glossy appearance Console sink legs sold separately Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 40-3/8" Overall dimensions: (L)37-3/8" x (W)21-5/8" x (H)8-7/8" Bowl dimensions: (L)17-5/16" x (W)13" x (D)7-1/16" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Front overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VPB13681 , VPB136P , VPB28141 , VPB34281 , VPB36281 Drains: EV6001 , KB1001 , KB1110MB , KB2001 , KB3001 , KB5001 , KB6001 , KB8101 , KBP1001 , KP1000 , KBT2121 Mounting Brackets: VSPLBRKT Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 , EVP1001

Templeton KS7805TPLBS Single-Handle 3-Hole Widespread Kitchen Faucet with Brass Sprayer, Oil Rubbed Bronze This faucet is the perfect embodiment of the traditional portrait of early American stylings. Able to fit a variety of sink set-ups, widespread kitchen faucets can be utilized in several multi-hole configurations. These are ideal for larger kitchens, as they are more spread apart, and with the included side-sprayer feature a 3-hole installation. The oil rubbed bronze finish will also provide a long lasting and warm touch to your kitchen ensemble. Allow the brass construction to provide a sturdy and reliant fixture. ADA compliance for faucets ensures accessibility for individuals with disabilities. Faucets must be designed for easy operation by persons with mobility issues, featuring lever handles that require minimal effort to turn on and off. These elements promote independence and safety, allowing individuals with mobility impairments to use the faucets with ease and dignity, in line with the Americans with Disabilities Act (ADA). Features Solid brass construction for durability Deck mount 3-hole installation Drip-free ceramic disc cartridge 1/2-14 NPSM connection 1.8 GPM/6.8 LPM spout flow rate at 60 PSI 9-7/8" spout reach 9-1/4" spout clearance 12" spout height High-arc gooseneck spout Single lever handle meets ADA guidelines Swivel spout for maximum clearance and versitility Includes brass side sprayer with 60" hose Disclaimer Kingston offers several special finishes that fall into two main groups: antiqued/distressed and living. Our antiqued/intentionally distressed finishes include Antique Brass, Antique Copper, Naples Bronze, and Black Stainless. Our living finish is Oil Rubbed Bronze. Antiqued/distressed finishes have had a darkener applied to create the appearance of patina and age. Due to the nature of plating and distressing processes, each production lot of these finishes varies slightly in brightness and tone. Some degree of inconsistency between items in antiqued or distressed finishes should be expected. We cannot guarantee an exact match between items in these finishes. The differences in tone and brightness are a variation rather than a flaw or defect. Living Finishes change over time. Our Oil Rubbed Bronze will patina over time such as taking on highlights in high-touch areas. We consider this dynamic nature a feature that gives each faucet a unique character over its lifetime of use and does not constitute a defect or flaw. Like our antiqued/distressed finishes, some degree of inconsistency between living finish items should be expected. We cannot guarantee an exact match between items in Oil Rubbed Bronze. Downloads Specification Sheet Parts Diagram Installation Guide Repair Instruction Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Aerators: A556427UNSK5

Templeton KVPB3022M38SQ 30-Inch Carrara Marble Vanity Sink Top (8" Faucet Drillings), Carrara Marble Built from a stunning Carrara marble for long-lasting durability, the Templeton 30 in. x 22 in. Carrara marble vanity top with rectangular sink offers elegant and transitional stylings. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Available in differing lengths, this vanity top in particular features dimensions of 30" (L) x 22" (W) x 11-1/4" (H). Pair this top with console legs, available in a variety of finishes. Kingston's carrara marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Italian Carrara Marble vanity top with backsplash Fits directly on most standard 30" vanity cabinet Pre-drilled 3-hole for 8" widespread faucet design Includes integral rectangular lavatory bowl Overall dimensions: (L)30" x (W)22" x (H)11-1/4" Bowl dimensions: (L)14-3/8" x (W)10-7/16" x (D)5-1/4" Backsplash dimensions: (L)30" x (H)4" x (T)3/4" 1-11/16" diameter drain size Front overflow hole Rear drain placement Professional installation recommended Pedestal/console legs available to match Marble surface polished for refined finish and stain resistance Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VAH242030C , VAH282033C , VBH211833C , VBH242030C , VBH282033C , VPB2218331 , VPB3322SQ1 , VPB33221 , XBH2317331 , VBH2619331 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 , EVP1001

Templeton KVPB30MBSQ6 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton VBH242030SB Brass Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Templeton 24 inch console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features High quality brass construction to give you long lasting durability Overall dimensions: (L)24" x (W)20-3/8" x (H)30" 1-1/2" (38mm) OD brass tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ

Templeton VAH282033SB Acrylic Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Templeton 24 inch console sink legs is constructed out of acrylic and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Made of solid acrylic with brass joint fittings Overall dimensions: (L)24" x (W)20-3/8" x (H)33-1/4" 1-1/2" (38mm) OD acrylic tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ

Templeton KVPB3022M38 30-Inch Carrara Marble Vanity Sink Top (8" Faucet Drillings), Carrara Marble Built from a stunning Carrara marble for long-lasting durability, the Templeton 30 in. x 22 in. Carrara marble vanity top with oval sink offers elegant and transitional stylings. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Available in differing lengths, this vanity top in particular features dimensions of 30" (L) x 22" (W) x 12-1/4" (H). Pair this top with console legs, available in a variety of finishes. Kingston's carrara marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Italian Carrara Marble vanity top with backsplash Fits directly on most standard 30" vanity cabinet Pre-drilled 3-hole for 8" widespread faucet design Includes integral oval lavatory bowl Overall dimensions: (L)30" x (W)22" x (H)12-1/4" Bowl dimensions: (L)14-3/4" x (W)11-13/16" x (D)6-1/4" Backsplash dimensions: (L)30" x (H)4" x (T)3/4" 1-5/8" diameter drain size Front overflow hole Rear drain placement Professional installation recommended Pedestal/console legs available to match Marble surface polished for refined finish and stain resistance Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VAH242030C , VAH282033C , VBH211833C , VBH242030C , VBH282033C , VPB2218331 , VPB3322SQ1 , VPB33221 , XBH2317331 , VBH2619331 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 , EVP1001

Templeton VPB1318B 31-Inch Ceramic Console Sink (8-Inch, 3-Hole), White Built from a stunning ceramic for long-lasting durability, the Templeton 31" ceramic console sink Bowl offers elegant and transitional stylings. The pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Available in differing lengths, this console top in particular features dimensions of (L)31" x (W)21-5/8" x (H)9-3/16". Pair this top with console legs, available in a variety of finishes. Features Item weight: 59.52 lbs. Fabricated from ceramic material for an everlasting glossy appearance Console sink legs sold separately Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 34" Overall dimensions: (L)31" x (W)21-5/8" x (H)9-3/16" Bowl dimensions: (L)17-5/16" x (W)13" x (D)6-7/8" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Front overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VPB136P , VPB2215331 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Mounting Brackets: VSPLBRKT Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 , EVP1001

Templeton KS3402TL One-Handle 1-Hole Bathroom Faucet with Deck Plate and Push Pop-Up Drain, Polished Brass This faucet is the perfect embodiment of the traditional portrait of early American stylings. Single-hole bathroom faucets provide a more streamlined look. Also, they will allow your bathroom to appear more spacious with the limited counter space they require. The Templeton single-handle bathroom faucet with push pop-up and its featured sturdy brass construction and premium polished brass finish are guaranteed to glamorize your home's traditional ensemble for years to come. Cherish the grandeur of European antiquity by freezing time and incorporating this perfected fusion of old and new into your home. A matching finish drain is also included. ADA compliance for faucets ensures accessibility for individuals with disabilities. Faucets must be designed for easy operation by persons with mobility issues, featuring lever handles that require minimal effort to turn on and off. These elements promote independence and safety, allowing individuals with mobility impairments to use the faucets with ease and dignity, in line with the Americans with Disabilities Act (ADA). Features Solid brass construction for durability Deck mount single-hole installation Drip-free ceramic disc cartridge 1/2-14 NPSM connection 1.2 GPM/4.5 LPM spout flow rate at 60 PSI 6-1/2" spout reach 5-1/8" spout clearance 6" spout height Low arc spout Single lever handle meets ADA guidelines Includes matching finish push pop-up drain Compliant with California Energy Commission Title 20 Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Aerators: A151627UNSL1

Templeton KVPB36MBSQ7 36-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 85.77 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)38" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton VBH282033C Brass Console Sink Legs, Polished Chrome A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Templeton 24 inch console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features High quality brass construction to give you long lasting durability Overall dimensions: (L)24" x (W)20-3/8" x (H)33-1/4" 1-1/2" (38mm) OD brass tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21181 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ

Templeton VPB1378 37-Inch Ceramic Console Sink with Legs (8-Inch, 3-Hole), White From Kingston Brass, this basin console with pedestal was designed with a striking design that will make almost any interior stand out. Constructed from solid ceramic, appreciate the finished glow that the console gives off. Installation of the console is on two legs and is mounted on the wall of the interior room. The console comes with a generous Bowl dimensions, while the overall console dimensions are (L)37-3/8 inch x (W)21-5/8 inch x (H)31-7/8 inch and is included with pre-drilled holes perfect for a 3-hole faucet install. The console's smooth texture allows for easy-to-clean and easy-to-manage maintenance. The console is also finished with a sleek white color that brings out the texture and the design of the ceramic material. Features Item weight: 72.38 lbs. Fabricated from ceramic material for an everlasting glossy appearance Comes with matching ceramic console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 40-3/8" Overall dimensions: (L)37-3/8" x (W)21-5/8" x (H)31-7/8" Bowl dimensions: (L)17-5/16" x (W)13" x (D)7-1/16" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Front overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB1001 , KB2001 , KB3001 , KB5001 , KB6001 , KB8101 , KBP1001 , KP1000 , KBT2121 Mounting Brackets: VSPLBRKT Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton GSC7575TL Single-Handle 1-or-3 Hole Deck Mount Pull-Out Sprayer Kitchen Faucet, Oil Rubbed Bronze This faucet is the perfect embodiment of the traditional portrait of early American stylings. An excellent options for smaller kitchens, the angled spout and extendable hose reach provide an optimized use of space. Minimalist design along with a classic style help you tackle your tough messes with the Templeton Single-Handle Pull-Out Kitchen Faucet's two-function sprayer. The brass construction and single handle also provide a sturdy, reliant, and easy to use fixture. Matching accessories are available for use. ADA compliance for faucets ensures accessibility for individuals with disabilities. Faucets must be designed for easy operation by persons with mobility issues, featuring lever handles that require minimal effort to turn on and off. These elements promote independence and safety, allowing individuals with mobility impairments to use the faucets with ease and dignity, in line with the Americans with Disabilities Act (ADA). Features Item weight: 5.18 lbs. Solid brass construction for durability Deck mount 1 or 3-hole installation with 10-1/16" (255.52 mm) deck plate Drip-free ceramic disc cartridge Standard US connection 1.8 GPM/6.8 LPM spout flow rate at 60 PSI 8-9/16" spout reach 6" spout clearance 8-5/16" spout height High-arc spout Single lever handle meets ADA guidelines Swivel spout for maximum clearance and versitility Dual function pull-out sprayer with 59" hose Disclaimer Kingston offers several special finishes that fall into two main groups: antiqued/distressed and living. Our antiqued/intentionally distressed finishes include Antique Brass, Antique Copper, Naples Bronze, and Black Stainless. Our living finish is Oil Rubbed Bronze. Antiqued/distressed finishes have had a darkener applied to create the appearance of patina and age. Due to the nature of plating and distressing processes, each production lot of these finishes varies slightly in brightness and tone. Some degree of inconsistency between items in antiqued or distressed finishes should be expected. We cannot guarantee an exact match between items in these finishes. The differences in tone and brightness are a variation rather than a flaw or defect. Living Finishes change over time. Our Oil Rubbed Bronze will patina over time such as taking on highlights in high-touch areas. We consider this dynamic nature a feature that gives each faucet a unique character over its lifetime of use and does not constitute a defect or flaw. Like our antiqued/distressed finishes, some degree of inconsistency between living finish items should be expected. We cannot guarantee an exact match between items in Oil Rubbed Bronze. Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Hoses: KH1470

Templeton KS7801TPLBS Single-Handle 3-Hole Widespread Kitchen Faucet with Brass Sprayer, Polished Chrome This faucet is the perfect embodiment of the traditional portrait of early American stylings. Able to fit a variety of sink set-ups, widespread kitchen faucets can be utilized in several multi-hole configurations. These are ideal for larger kitchens, as they are more spread apart, and with the included side-sprayer feature a 3-hole installation. The polished chrome finish will also add a glistening elegance to your kitchen ensemble. Allow the brass construction to provide a sturdy and reliant fixture. ADA compliance for faucets ensures accessibility for individuals with disabilities. Faucets must be designed for easy operation by persons with mobility issues, featuring lever handles that require minimal effort to turn on and off. These elements promote independence and safety, allowing individuals with mobility impairments to use the faucets with ease and dignity, in line with the Americans with Disabilities Act (ADA). Features Solid brass construction for durability Deck mount 3-hole installation Drip-free ceramic disc cartridge 1/2-14 NPSM connection 1.8 GPM/6.8 LPM spout flow rate at 60 PSI 9-7/8" spout reach 9-1/4" spout clearance 12" spout height High-arc gooseneck spout Single lever handle meets ADA guidelines Swivel spout for maximum clearance and versitility Includes brass side sprayer with 60" hose Downloads Specification Sheet Parts Diagram Installation Guide Repair Instruction Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Aerators: A556427UNSK1

Templeton KVPB3622M38SQ 36-Inch Carrara Marble Vanity Sink Top (8" Faucet Drillings), Carrara Marble Built from a stunning Carrara marble for long-lasting durability, the Templeton 36 in. x 22 in. Carrara marble vanity top with rectangular sink offers elegant and transitional stylings. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Available in differing lengths, this vanity top in particular features dimensions of 36" (L) x 22" (W) x 11-1/4" (H). Pair this top with console legs, available in a variety of finishes. Kingston's carrara marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Italian Carrara Marble vanity top with backsplash Fits directly on most standard 36" vanity cabinet Pre-drilled 3-hole for 8" widespread faucet design Includes integral rectangular lavatory bowl Overall dimensions: (L)36" x (W)22" x (H)11-1/4" Bowl dimensions: (L)14-3/8" x (W)10-7/16" x (D)5-1/4" Backsplash dimensions: (L)30" x (H)4" x (T)3/4" 1-11/16" diameter drain size Front overflow hole Rear drain placement Professional installation recommended Pedestal/console legs available to match Marble surface polished for refined finish and stain resistance Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VAH242030C , VAH282033C , VBH242030C , VBH281833C , VBH282033C , VPB2818331 , VPB33081 , VPB3328SQ1 , VPB33281 , VPB34251 , VPB36251 , VBH2619331 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 , EVP1001

Templeton KVPB3030MA7 30-Inch Carrara Marble Vanity Top with Acrylic Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the acrylic legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 84.01 lbs. Includes Italian Carrara Marble vanity top with backsplash Paired with elegant acrylic legs, accented by brass fittings Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)34-3/4" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007