Console Sinks

Imperial VPB5321 32-Inch Ceramic Console Sink with Ceramic Legs (1-Hole), White From Kingston Brass, this basin console with pedestal was designed with a striking design that will make almost any interior stand out. Constructed from solid ceramic, appreciate the finished glow that the console gives off. Installation of the console is on two legs and is mounted on the wall of the interior room. The console comes with a generous Bowl dimensions, while the overall console dimensions are 31-7/8 inch (L) x 21-1/4 inch (W) x 33-1/2 inch (H) and is included with pre-drilled hole perfect for a 1-hole faucet install. The console's smooth texture allows for easy-to-clean and easy-to-manage maintenance. The console is also finished with a sleek white color that brings out the texture and the design of the ceramic material. Features Item weight: 74.97 lbs. Fabricated from ceramic material for an everlasting glossy appearance Comes with matching ceramic console legs Pre-drilled 1-hole for single hole faucet application Includes integral oval lavatory bowl Minimum cabinet size: 34-7/8" Overall dimensions: (L)31-7/8" x (W)21-1/4" x (H)33-1/2" Bowl dimensions: (L)18-7/8" x (W)12-3/16" x (D)5-7/8" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)31-7/8" x (H)1-1/4" x (T)7/8" Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VPB532P Drains: EV6001 , KB1001 , KB2001 , KB3001 , KB5001 , KB6001 , KB8101 , KBP1001 , KP1000 , KBT2121 Mounting Brackets: VSPLBRKT Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Imperial VPB5328 32-Inch Ceramic Console Sink with Ceramic Legs (8-Inch, 3-Hole), White From Kingston Brass, this basin console with pedestal was designed with a striking design that will make almost any interior stand out. Constructed from solid ceramic, appreciate the finished glow that the console gives off. Installation of the console is on two legs and is mounted on the wall of the interior room. The console comes with a generous Bowl dimensions, while the overall console dimensions are 31-7/8 inch (L) x 21-1/4 inch (W) x 33-1/2 inch (H) and is included with pre-drilled holes perfect for a 3-hole faucet install. The console's smooth texture allows for easy-to-clean and easy-to-manage maintenance. The console is also finished with a sleek white color that brings out the texture and the design of the ceramic material. Features Item weight: 74.97 lbs. Fabricated from ceramic material for an everlasting glossy appearance Comes with matching ceramic console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 34-7/8" Overall dimensions: (L)31-7/8" x (W)21-1/4" x (H)33-1/2" Bowl dimensions: (L)18-7/8" x (W)12-3/16" x (D)5-7/8" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)31-7/8" x (H)1-1/4" x (T)7/8" Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VPB532P Drains: EV6001 , KB1001 , KB2001 , KB3001 , KB5001 , KB6001 , KB8101 , KBP1001 , KP1000 , KBT2121 Mounting Brackets: VSPLBRKT Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton KVPB30MBSQ7 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Victorian VPB33087ST 30-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Brushed Brass With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. The pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 65.53 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 32-15/16" (837 mm) Overall dimensions: (L)29-15/16" x (W)21-5/8" x (H)34-3/8" Bowl dimensions: (L)19-11/16" x (W)13-3/4" x (D)7-1/16" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Extension Legs: VPBL314887 , VPBL514887 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton KVPB3030MB7 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.04 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)34-3/4" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Quadras VWP3122A0 31-Inch Ceramic Console Sink with Steel Base and Shelf (1-Hole), White/Matte Black Exquisitely styled for your contemporary taste, this console sink will enhance your bathroom living space. With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. The Kingston Brass 31-inch ceramic console sink (1-hole) features a wash basin and steel base that is available in a handful of finish options. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 75.85 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes steel console sink base Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" (790.7 mm) x (W)22-1/16" (560.32 mm) x (H)31-1/4" (793.75 mm) Bowl dimensions: (L)18-1/8" (460.50 mm) x (W)12-5/8" (320.80 mm) x (D)4-15/16" (125.48 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000

Templeton VBH242030SB Brass Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Templeton 24 inch console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features High quality brass construction to give you long lasting durability Overall dimensions: (L)24" x (W)20-3/8" x (H)30" 1-1/2" (38mm) OD brass tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ

Imperial VPB5324 32-Inch Ceramic Console Sink with Ceramic Legs (4-Inch, 3-Hole), White From Kingston Brass, this basin console with pedestal was designed with a striking design that will make almost any interior stand out. Constructed from solid ceramic, appreciate the finished glow that the console gives off. Installation of the console is on two legs and is mounted on the wall of the interior room. The console comes with a generous Bowl dimensions, while the overall console dimensions are 31-7/8 inch (L) x 21-1/4 inch (W) x 33-1/2 inch (H) and is included with pre-drilled holes perfect for a 3-hole faucet install. The console's smooth texture allows for easy-to-clean and easy-to-manage maintenance. The console is also finished with a sleek white color that brings out the texture and the design of the ceramic material. Features Item weight: 74.97 lbs. Fabricated from ceramic material for an everlasting glossy appearance Comes with matching ceramic console legs Pre-drilled 3-hole for 4" centerset or mini-widespread faucet design Includes integral oval lavatory bowl Minimum cabinet size: 34-7/8" Overall dimensions: (L)31-7/8" x (W)21-1/4" x (H)33-1/2" Bowl dimensions: (L)18-7/8" x (W)12-3/16" x (D)5-7/8" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)31-7/8" x (H)1-1/4" x (T)7/8" Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Consoles: VPB532P Drains: EV6001 , KB1001 , KB2001 , KB3001 , KB5001 , KB6001 , KB8101 , KBP1001 , KP1000 , KBT2121 Mounting Brackets: VSPLBRKT Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton KVPB3030MBSQ7 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.04 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)34-3/4" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Edwardian VPB30167 Brass Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Edwardian brass console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Console sink legs made from solid brass tubing Overall dimensions: (L)16" x (W)15-1/2" x (H)30" 3/4" (19mm) OD brass horizontal tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Mounting Brackets: VSPBRKT Sinks: EV2018W1 , EV2018W34 , EV2018W38 , EV2019W34 , EV2019W38 , VPB3248SQA

Edwardian KVPB2018W87 20-Inch Porcelain Console Sink with Brass Legs (8-Inch, 3-Hole), White/Brushed Brass With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. The pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Faucets in the following series are not compatible with this sink: KS116X series, KS396X series, KS446X series, and KS556X series. Features Item weight: 44.14 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 23" Overall dimensions: (L)20" (508 mm) x (W)18" (457.2 mm) x (H)33-15/16" (862.08 mm) Bowl dimensions: (L)18-1/8" (460.50 mm) x (W)12-5/8" (320.80 mm) x (D)5" (127 mm) 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB1007SB , KB1117 , KB2007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Templeton KVPB30MB7 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21187 Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007

Fauceture VPB33087 Stainless Steel Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Imperial stainless steel console sink legs is constructed out of stainless steel and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Console sink legs made from heavy duty stainless steel tubing Overall dimensions: (L)25-3/16" x (W)17-15/16" x (H)30-1/2" 1-1/4" (32mm) OD stainless steel horizontal tubing 1-1/2" (38mm) OD stainless steel vertical tubing Sink and top sold separately Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Extension Legs: VPBL314887 , VPBL514887 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ , VPB3308B , VPB3368SQA

Templeton VBH282033PN Brass Console Sink Legs, Polished Nickel A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Templeton 24 inch console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features High quality brass construction to give you long lasting durability Overall dimensions: (L)24" x (W)20-3/8" x (H)33-1/4" 1-1/2" (38mm) OD brass tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21186 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ

Victorian VPB33081ST 30-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. The pristine, stain-resistant surface and glistening finish make for a very sturdy fixture that is easily maintained. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 65.53 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 32-15/16" (837 mm) Overall dimensions: (L)29-15/16" x (W)21-5/8" x (H)34-3/8" Bowl dimensions: (L)19-11/16" x (W)13-3/4" x (D)7-1/16" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Extension Legs: VPBL314881 , VPBL514881 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Edwardian VPB33287 Brass Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Edwardian brass console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Solid brass construction for durability Overall dimensions: (L)28" x (W)18-15/16" x (H)33" 3/4" (19mm) OD brass horizontal tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ , LBT312271 , LBT31227W34 , LBT31227W38 , LBT372271 , LBT37227W34 , LBT37227W38 , KVPB3722A38 , KVPB3722L38 , KVPB3722L38SQ

Edwardian VPB33227 Brass Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Edwardian brass console sink legs is constructed out of brass and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Solid brass construction for durability Overall dimensions: (L)22-5/16" x (W)18-15/16" x (H)33" 3/4" (19mm) OD brass horizontal tubing Sink and top sold separately Corrosion-resistant finish Designed for long-lasting durability Easy-to-clean Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , LBT252271 , LBT25227W34 , LBT25227W38

Imperial VPB14887 Stainless Steel Console Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Imperial stainless steel console legs is constructed out of stainless steel and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Console sink legs made from heavy duty stainless steel tubing Overall dimensions: (L)41" x (W)16" x (H)30-1/2" 1-1/4" (32mm) OD brass horizontal tubing 1-1/2" (38mm) OD brass vertical tubing Sink and top sold separately Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Extension Legs: VPBL314887 , VPBL514887 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: VPB1488B

Fauceture VPB13687 Stainless Steel Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Kingston Brass Fauceture stainless steel console sink legs is constructed out of stainless steel and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Console sink legs made from heavy duty stainless steel tubing Overall dimensions: (L)28-1/2" x (W)14-3/4" x (H)30-1/2" 1-1/4" (32mm) OD brass horizontal tubing 1-1/2" (38mm) OD brass vertical tubing 18 gauge stainless steel Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Extension Legs: VPBL314887 , VPBL514887 Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: VPB1368B , VPB1368BK , VPB1378B , VPB3368SQA

Templeton KVPB30MB6 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton KVPB30MBSQ6 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Nickel With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21186 Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006

Templeton VPB1318 31-Inch Ceramic Console Sink and Legs (8-Inch, 3-Hole), White From Kingston Brass, this basin console with pedestal was designed with a striking design that will make almost any interior stand out. Constructed from solid ceramic, appreciate the finished glow that the console gives off. Installation of the console is on two legs and is mounted on the wall of the interior room. The console comes with a generous Bowl dimensions, while the overall console dimensions are (L)31 inch x (W)21-5/8 inch x (H)32-11/16 inch and is included with pre-drilled holes perfect for a 3-hole faucet install. The console's smooth texture allows for easy-to-clean and easy-to-manage maintenance. The console is also finished with a sleek white color that brings out the texture and the design of the ceramic material. Features Item weight: 88.18 lbs. Fabricated from ceramic material for an everlasting glossy appearance Comes with matching ceramic console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 34" Overall dimensions: (L)31" x (W)21-5/8" x (H)32-11/16" Bowl dimensions: (L)17-5/16" x (W)13" x (D)6-7/8" 1-3/4" (44.45 mm) drain hole diameter Rear drain placement Does not include backsplash Front overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Mounting Brackets: VSPLBRKT Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton KVPB3030MBSQ1 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Chrome With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.04 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)34-3/4" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21181 Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001

Templeton KVPB30MBSQ0 30-Inch Carrara Marble Vanity Top with Brass Legs (8-Inch, 3-Hole), Carrara Marble White/Matte Black With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 80.26 lbs. Includes Italian Carrara Marble vanity top with backsplash Includes high quality brass console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Console Shelfs: VXHSB21180 Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000