Plumbing Parts

Trimscape CC53307DLVKB30 Modern Plumbing Sink Trim Kit with Bottle Trap and Drain, Brushed Brass This contemporary themed vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 13-7/8" bottle trap, 22-gauge push-button drain without overflow and a mounting ring. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include modern lever handle Includes (2) 2-7/16" low profile decorative flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One modern bottle style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 13-13/16” from drain end to wall-end One "no overflow" drain and mounting ring kit for vessel sink 22 gauge 1-1/4" O.D. push-up pop-up drain, no overflow Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1007

Trimscape CC53302VOKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Overflow Drain, Polished Brass This traditional style vessel sink plumbing kit consists of all the necessary parts for installing a waste water draining system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, a mounting ring and a 22 gauge European Style Umbrella drain with overflow. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1002

Trimscape CC53301VOKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Overflow Drain, Polished Chrome This traditional style vessel sink plumbing kit consists of all the necessary parts for installing a waste water draining system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, a mounting ring and a 22 gauge European Style Umbrella drain with overflow. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1001

Trimscape CC53305VOKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Overflow Drain, Oil Rubbed Bronze This traditional style vessel sink plumbing kit consists of all the necessary parts for installing a waste water draining system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, a mounting ring and a 22 gauge European Style Umbrella drain with overflow. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Disclaimer Kingston offers several special finishes that fall into two main groups: antiqued/distressed and living. Our antiqued/intentionally distressed finishes include Antique Brass, Antique Copper, Naples Bronze, and Black Stainless. Our living finish is Oil Rubbed Bronze. Antiqued/distressed finishes have had a darkener applied to create the appearance of patina and age. Due to the nature of plating and distressing processes, each production lot of these finishes varies slightly in brightness and tone. Some degree of inconsistency between items in antiqued or distressed finishes should be expected. We cannot guarantee an exact match between items in these finishes. The differences in tone and brightness are a variation rather than a flaw or defect. Living Finishes change over time. Our Oil Rubbed Bronze will patina over time such as taking on highlights in high-touch areas. We consider this dynamic nature a feature that gives each faucet a unique character over its lifetime of use and does not constitute a defect or flaw. Like our antiqued/distressed finishes, some degree of inconsistency between living finish items should be expected. We cannot guarantee an exact match between items in Oil Rubbed Bronze. Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1005

Trimscape CC53306VOKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Overflow Drain, Polished Nickel This traditional style vessel sink plumbing kit consists of all the necessary parts for installing a waste water draining system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, a mounting ring and a 22 gauge European Style Umbrella drain with overflow. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1006

Trimscape CC53302VKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Drain, Polished Brass This traditional style vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, mounting ring and an 22-gauge Push-button drain without overflow hole. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1002

Trimscape CC53301VKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Drain, Polished Chrome This traditional style vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, mounting ring and an 22-gauge Push-button drain without overflow hole. The parts are all made from polished chrome for that attractive shine and also layered for stain and tarnishing resistance. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1001

Trimscape CC53305VKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Drain, Oil Rubbed Bronze This traditional style vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, mounting ring and an 22-gauge Push-button drain without overflow hole. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Disclaimer Kingston offers several special finishes that fall into two main groups: antiqued/distressed and living. Our antiqued/intentionally distressed finishes include Antique Brass, Antique Copper, Naples Bronze, and Black Stainless. Our living finish is Oil Rubbed Bronze. Antiqued/distressed finishes have had a darkener applied to create the appearance of patina and age. Due to the nature of plating and distressing processes, each production lot of these finishes varies slightly in brightness and tone. Some degree of inconsistency between items in antiqued or distressed finishes should be expected. We cannot guarantee an exact match between items in these finishes. The differences in tone and brightness are a variation rather than a flaw or defect. Living Finishes change over time. Our Oil Rubbed Bronze will patina over time such as taking on highlights in high-touch areas. We consider this dynamic nature a feature that gives each faucet a unique character over its lifetime of use and does not constitute a defect or flaw. Like our antiqued/distressed finishes, some degree of inconsistency between living finish items should be expected. We cannot guarantee an exact match between items in Oil Rubbed Bronze. Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1005

Trimscape CC53307VKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Drain, Brushed Brass This traditional style vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, mounting ring and an 22-gauge Push-button drain without overflow hole. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1007

Trimscape CC53306VKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Drain, Polished Nickel This traditional style vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap, mounting ring and an 22-gauge Push-button drain without overflow hole. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-7/16" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1006

Gourmet Scape KPK200 Traditional Plumbing Sink Trim Kit with P-Trap, Matte Black This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lineS, two traditional decorative flanges and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2000 , EVP3000

Gourmet Scape KPK205 Traditional Plumbing Sink Trim Kit with P-Trap, Oil Rubbed Bronze This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lineS, two traditional decorative flanges and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Disclaimer Kingston offers several special finishes that fall into two main groups: antiqued/distressed and living. Our antiqued/intentionally distressed finishes include Antique Brass, Antique Copper, Naples Bronze, and Black Stainless. Our living finish is Oil Rubbed Bronze. Antiqued/distressed finishes have had a darkener applied to create the appearance of patina and age. Due to the nature of plating and distressing processes, each production lot of these finishes varies slightly in brightness and tone. Some degree of inconsistency between items in antiqued or distressed finishes should be expected. We cannot guarantee an exact match between items in these finishes. The differences in tone and brightness are a variation rather than a flaw or defect. Living Finishes change over time. Our Oil Rubbed Bronze will patina over time such as taking on highlights in high-touch areas. We consider this dynamic nature a feature that gives each faucet a unique character over its lifetime of use and does not constitute a defect or flaw. Like our antiqued/distressed finishes, some degree of inconsistency between living finish items should be expected. We cannot guarantee an exact match between items in Oil Rubbed Bronze. Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2005 , EVP3005

Gourmet Scape KPK207 Traditional Plumbing Sink Trim Kit with P-Trap, Brushed Brass This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lineS, two traditional decorative flanges and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2007 , EVP3007

Gourmet Scape KPK206 Traditional Plumbing Sink Trim Kit with P-Trap, Polished Nickel This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lineS, two traditional decorative flanges and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2006 , EVP3006

Gourmet Scape KPK208 Traditional Plumbing Sink Trim Kit with P-Trap, Brushed Nickel This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lineS, two traditional decorative flanges and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2008 , EVP3008

Gourmet Scape KPK201 Traditional Plumbing Sink Trim Kit with P-Trap, Polished Chrome This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lines, two traditional decorative flanges and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2001 , EVP3001

Gourmet Scape KPK202 Traditional Plumbing Sink Trim Kit with P-Trap, Polished Brass This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lineS, two traditional decorative flanges, and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2002 , EVP3002

Gourmet Scape KPK203 Traditional Plumbing Sink Trim Kit with P-Trap, Antique Brass This 7-piece kitchen plumbing supply combo features all the necessary components to drain the flow of waste water efficiently. The set includes two 1/4-turn angle stops with cross handles, two 30" bullnose supply lineS, two traditional decorative flanges and a traditional 1-1/2" OD decorative p-trap. Each of these parts are constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for kitchen sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional cross handles Includes (2) 2-3/8" flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/2” diameter for kitchen sink drains P-trap measures 12” from drain inlet center to wall-end Disclaimer Kingston offers several special finishes that fall into two main groups: antiqued/distressed and living. Our antiqued/intentionally distressed finishes include Antique Brass, Antique Copper, Naples Bronze, and Black Stainless. Our living finish is Oil Rubbed Bronze. Antiqued/distressed finishes have had a darkener applied to create the appearance of patina and age. Due to the nature of plating and distressing processes, each production lot of these finishes varies slightly in brightness and tone. Some degree of inconsistency between items in antiqued or distressed finishes should be expected. We cannot guarantee an exact match between items in these finishes. The differences in tone and brightness are a variation rather than a flaw or defect. Living Finishes change over time. Our Oil Rubbed Bronze will patina over time such as taking on highlights in high-touch areas. We consider this dynamic nature a feature that gives each faucet a unique character over its lifetime of use and does not constitute a defect or flaw. Like our antiqued/distressed finishes, some degree of inconsistency between living finish items should be expected. We cannot guarantee an exact match between items in Oil Rubbed Bronze. Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP2003 , EVP3003

Trimscape CC53302DLVKB30 Modern Plumbing Sink Trim Kit with Bottle Trap and Drain, Polished Brass This contemporary themed vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 13-7/8" bottle trap, 22-gauge push-button drain without overflow and a mounting ring. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include modern lever handle Includes (2) 2-7/16" low profile decorative flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One modern bottle style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 13-13/16” from drain end to wall-end One "no overflow" drain and mounting ring kit for vessel sink 22 gauge 1-1/4" O.D. push-up pop-up drain, no overflow Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1002

Trimscape CC53308DLVKB30 Modern Plumbing Sink Trim Kit with Bottle Trap and Drain, Brushed Nickel This contemporary themed vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 13-7/8" bottle trap, 22-gauge push-button drain without overflow and a mounting ring. The parts are all made from brushed nickel for that bright radiance and also layered for stain and tarnishing resistance. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include modern lever handle Includes (2) 2-7/16" low profile decorative flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One modern bottle style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 13-13/16” from drain end to wall-end One "no overflow" drain and mounting ring kit for vessel sink 22 gauge 1-1/4" O.D. push-up pop-up drain, no overflow Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1008

Trimscape CC53300DLVKB30 Modern Plumbing Sink Trim Kit with Bottle Trap and Drain, Matte Black This contemporary themed vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 13-7/8" bottle trap, 22-gauge push-button drain without overflow and a mounting ring. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include modern lever handle Includes (2) 2-7/16" low profile decorative flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One modern bottle style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 13-13/16” from drain end to wall-end One "no overflow" drain and mounting ring kit for vessel sink 22 gauge 1-1/4" O.D. push-up pop-up drain, no overflow Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1000

Trimscape CC53303DLVKB30 Modern Plumbing Sink Trim Kit with Bottle Trap and Drain, Antique Brass This contemporary themed vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 13-7/8" bottle trap, 22-gauge push-button drain without overflow and a mounting ring. Constructed of high quality material and a tarnish-resistant finish, designed for long-lasting performance. Available in a variety of stunning finishes ready to match any home decor. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include modern lever handle Includes (2) 2-7/16" low profile decorative flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One modern bottle style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 13-13/16” from drain end to wall-end One "no overflow" drain and mounting ring kit for vessel sink 22 gauge 1-1/4" O.D. push-up pop-up drain, no overflow Disclaimer Kingston offers several special finishes that fall into two main groups: antiqued/distressed and living. Our antiqued/intentionally distressed finishes include Antique Brass, Antique Copper, Naples Bronze, and Black Stainless. Our living finish is Oil Rubbed Bronze. Antiqued/distressed finishes have had a darkener applied to create the appearance of patina and age. Due to the nature of plating and distressing processes, each production lot of these finishes varies slightly in brightness and tone. Some degree of inconsistency between items in antiqued or distressed finishes should be expected. We cannot guarantee an exact match between items in these finishes. The differences in tone and brightness are a variation rather than a flaw or defect. Living Finishes change over time. Our Oil Rubbed Bronze will patina over time such as taking on highlights in high-touch areas. We consider this dynamic nature a feature that gives each faucet a unique character over its lifetime of use and does not constitute a defect or flaw. Like our antiqued/distressed finishes, some degree of inconsistency between living finish items should be expected. We cannot guarantee an exact match between items in Oil Rubbed Bronze. Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1003

Trimscape CC53301DLVKB30 Modern Plumbing Sink Trim Kit with Bottle Trap and Drain, Polished Chrome This contemporary themed vessel sink kit consists of all the necessary parts to set up a sound waste water drainage system. The parts included are single handle compression angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 13-7/8" bottle trap, 22-gauge push-button drain without overflow and a mounting ring. The parts are all made from polished chrome for that attractive shine and also layered for stain and tarnishing resistance. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2" (Nom) copper pipe (Compression fitting) Angle stop inlet is 5/8" O.D. compression (compression slip fit) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include modern lever handle Includes (2) 2-7/16" low profile decorative flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One modern bottle style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 13-13/16” from drain end to wall-end One "no overflow" drain and mounting ring kit for vessel sink 22 gauge 1-1/4" O.D. push-up pop-up drain, no overflow Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1001

Trimscape CC43101VOKB30 Traditional Plumbing Sink Trim Kit with P-Trap and Overflow Drain, Polished Chrome This traditional style vessel sink plumbing kit consists of all the necessary parts for installing a waste water draining system. The parts included are single handle 1/2" IPS angle stops, 30" bullnose lavatory supply lines, 1/2" IPS bell flanges, a 1-1/4" P-trap and a drain with mounting ring. All the parts are made from polished chrome for that glistening shine and also layered for resistance in staining and tarnishing. Features Solid brass construction Supply and p-trap plumbing trim kit for bathroom sinks Kit contains: 2 angle stops, 2 wall flanges, 2 supply lines, 1 p-trap, 1 p-trap wall flange, 1 drain, 1 mounting ring Angle stops designed to fit 1/2” NPT male (exterior threads) stub-out Angle stop inlet is 1/2” NPT female (interior threads) Angle stop outlet is 3/8” O.D. compression (compression slip fit) Angle stops include traditional lever handle Includes (2) 2-3/8" bell flanges to cover any unsightly holes Two pieces 3/8" x 30" bull nose rigid supply lines One traditional style p-trap with flange P-trap is 1-1/4” diameter for bathroom sink drains P-trap measures 12” from drain inlet center to wall-end One pop-up drain with overflow and mounting ring kit for vessel sink 22 gauge 1-1/4" O.D. push-up pop-up drain with overflow hole Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Tailpieces: EVP1001