Are you a Pro?
Get [PRO] Pricing
Get [PRO] Pricing
Bathroom Sinks
-
$1,595.85Dreyfuss KVPB30M87ST 30-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass
Kingston BrassView Description
Dreyfuss KVPB30M87ST 30-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 77.77 lbs. Includes Italian Carrara Marble vanity top with backsplash Base is constructed of stainless steel tubing and brass joint fittings Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38-3/16" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007 -
$1,795.85Dreyfuss KVPB36M87ST 36-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass
Kingston BrassView Description
Dreyfuss KVPB36M87ST 36-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 87.89 lbs. Includes Italian Carrara Marble vanity top with backsplash Base is constructed of stainless steel tubing and brass joint fittings Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)38-3/16" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007 -
$1,095.85Dreyfuss KVPB25227W41 25-Inch Ceramic Console Sink with Stainless Steel Legs (4-Inch, 3-Hole), White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB25227W41 25-Inch Ceramic Console Sink with Stainless Steel Legs (4-Inch, 3-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole for 4" centerset or mini-widespread faucet design Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$985.95Dreyfuss VPB2218337 Stainless Steel Console Sink Legs, Brushed Brass
Kingston BrassView Description
Dreyfuss VPB2218337 Stainless Steel Console Sink Legs, Brushed Brass A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Dreyfuss stainless steel console sink legs is constructed out of stainless steel and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Console sink legs made from heavy duty stainless steel tubing Overall dimensions: (L)22-5/16" x (W)18-15/16" x (H)33-7/16" 1-1/4" (32mm) OD stainless steel horizontal tubing 1-1/2" (38mm) OD stainless steel vertical tubing Sink and top sold separately Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3022M38 , KVPK3022K38 , KVPB3022M38SQ , KVPK3022K38SQ , KMS3022M38 , KMS3022M38SQ , LBT252271 , LBT25227W34 , LBT25227W38 -
$1,315.85Dreyfuss KVPB25227W87 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Brushed Brass
Kingston BrassView Description
Dreyfuss KVPB25227W87 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Brushed Brass With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007 -
$1,485.85Dreyfuss KVPB31227W87 31-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Brushed Brass
Kingston BrassView Description
Dreyfuss KVPB31227W87 31-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Brushed Brass With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. The console sink basin comes with 8" widespread faucet holes and overflow hole. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 55.92 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007 -
$875.95Dreyfuss VPB2818331 Stainless Steel Console Sink Legs, Polished Chrome
Kingston BrassView Description
Dreyfuss VPB2818331 Stainless Steel Console Sink Legs, Polished Chrome A simple minimalist support for your console sink tops, this sink base comes in a multitude of finishes that will bring out the shine in your bathroom. The Fauceture Dreyfuss stainless steel console sink legs is constructed out of stainless steel and is designed for durability and reliability to last for years to come. Pair these legs with a console top, available in multiple materials. Features Console sink legs made from heavy duty stainless steel tubing Overall dimensions: (L)28" x (W)18-15/16" x (H)33-7/16" 1-1/4" (32mm) OD stainless steel horizontal tubing 1-1/2" (38mm) OD stainless steel vertical tubing Sink and top sold separately Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Mounting Brackets: VSPBRKT , VSPLBRKT Sinks: KVPB3622M38 , KVPK3622K38 , KVPB3622M38SQ , KVPK3622K38SQ , KMS3622M38 , KMS3622M38SQ , LBT312271 , LBT31227W34 , LBT31227W38 , LBT372271 , LBT37227W34 , LBT37227W38 -
$1,265.85Dreyfuss KVPB3122711 31-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB3122711 31-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. The console sink basin comes with single faucet hole and rear overflow. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 55.92 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$1,315.85Dreyfuss KVPB25227W86 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Nickel
Kingston BrassView Description
Dreyfuss KVPB25227W86 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006 -
$1,375.85Dreyfuss KVPB30M8SQ1ST 30-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB30M8SQ1ST 30-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Chrome With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 77.77 lbs. Includes Italian Carrara Marble vanity top with backsplash Base is constructed of stainless steel tubing and brass joint fittings Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38-3/16" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$1,315.85Dreyfuss KVPB25227W80 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Matte Black
Kingston BrassView Description
Dreyfuss KVPB25227W80 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Matte Black With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000 -
$1,315.85Dreyfuss KVPB25227W47 25-Inch Ceramic Console Sink with Stainless Steel Legs (4-Inch, 3-Hole), White/Brushed Brass
Kingston BrassView Description
Dreyfuss KVPB25227W47 25-Inch Ceramic Console Sink with Stainless Steel Legs (4-Inch, 3-Hole), White/Brushed Brass With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole for 4" centerset or mini-widespread faucet design Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007 -
$1,485.85Dreyfuss KVPB31227W80 31-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Matte Black
Kingston BrassView Description
Dreyfuss KVPB31227W80 31-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Matte Black With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. The console sink basin comes with 8" widespread faucet holes and overflow hole. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 55.92 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000 -
$1,319.90Dreyfuss KVPB37227W81 37-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB37227W81 37-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 64.76 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 40-3/8" Overall dimensions: (L)37-3/8" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/2" x (W)12-5/8" x (D)5-5/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$1,595.85Dreyfuss KVPB30M8SQ7ST 30-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass
Kingston BrassView Description
Dreyfuss KVPB30M8SQ7ST 30-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Brushed Brass With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 77.77 lbs. Includes Italian Carrara Marble vanity top with backsplash Base is constructed of stainless steel tubing and brass joint fittings Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 33" (838 mm) Overall dimensions: (L)30" x (W)22" x (H)38-3/16" Bowl dimensions: (L)14-3/8" (365.25 mm) x (W)10-7/16" (265.18 mm) x (D)5-1/4" (133.35 mm) 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)30" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6007 , KB3007 , KB5007 , KB6007 , KB8107 , KBT2127 Overflow Covers: EVF1117 Plumbing Trim Kits: KPK107P P-Traps: CC1187 , CC2187 , CC5187 , CC6187 , CC7187 , CC8147 , CC9187 , DD8107 , DD8407 Tailpieces: EVP1007 -
$1,575.85Dreyfuss KVPB36M81ST 36-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB36M81ST 36-Inch Carrara Marble Vanity Top with Stainless Steel Legs (8-Inch, 3-Hole), Carrara Marble White/Polished Chrome With a beautiful Carrara Marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Kingston's Carrara Marble tops are polished, but they are not sealed. Polished marble has a shiny surface and resists stains. Natural stone, even when polished, is still somewhat porous and does remain susceptible to etching by acidic compounds like fruit juice, vinegar, some cleaning solvents, etc. For customers that wish to further protect their investment the marble can be sealed. The following is intended solely for informational purposes. Kingston does not warranty nor accept liability for damages or other negative outcomes resulting from any treatment or coating applied to the countertop after purchase, whether applied by the customer or by a third party. For anyone unfamiliar with this nature of project, Kingston recommends consulting an experienced professional in your area. When looking for a sealant product, please be sure to seek a product specifically designed for use on polished marble, granite or other natural stone surfaces. Be sure to always avoid anything containing a citrus ingredient, acid ingredient, tung oil, linseed oil, or other natural oils. These can damage or discolor your marble. Features Item weight: 87.89 lbs. Includes Italian Carrara Marble vanity top with backsplash Base is constructed of stainless steel tubing and brass joint fittings Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral oval lavatory bowl Minimum cabinet size: 39" (991 mm) Overall dimensions: (L)36" x (W)22" x (H)38-3/16" Bowl dimensions: (L)14-3/4" (374.65 mm) x (W)11-13/16" (299.97 mm) x (D)6-1/4" (158.75 mm) 1-5/8" (41.28 mm) drain hole diameter Rear drain placement Backsplash dimensions: (L)36" x (H)4" x (T)3/4" Front overflow hole Marble surface polished for refined finish and stain resistance Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$1,485.85Dreyfuss KVPB31227W40 31-Inch Ceramic Console Sink with Stainless Steel Legs (4-Inch, 3-Hole), White/Matte Black
Kingston BrassView Description
Dreyfuss KVPB31227W40 31-Inch Ceramic Console Sink with Stainless Steel Legs (4-Inch, 3-Hole), White/Matte Black With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. The console sink basin comes with 4" centerset faucet holes and overflow hole. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 52.61 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole for 4" centerset or mini-widespread faucet design Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000 -
$1,095.85Dreyfuss KVPB25227W81 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB25227W81 25-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$1,265.85Dreyfuss KVPB31227W81 31-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB31227W81 31-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. The console sink basin comes with 8" widespread faucet holes and overflow hole. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 55.92 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 34-1/8" Overall dimensions: (L)31-1/8" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-15/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$1,539.90Dreyfuss KVPB37227W80 37-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Matte Black
Kingston BrassView Description
Dreyfuss KVPB37227W80 37-Inch Ceramic Console Sink with Stainless Steel Legs (8-Inch, 3-Hole), White/Matte Black With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 64.76 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 3-hole installation for 8" (203.2 mm) widespread faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 40-3/8" Overall dimensions: (L)37-3/8" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/2" x (W)12-5/8" x (D)5-5/16" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000 -
$1,315.85Dreyfuss KVPB2522716 25-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Polished Nickel
Kingston BrassView Description
Dreyfuss KVPB2522716 25-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Polished Nickel With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6006 , KB3006 , KB5006 , KB6006PN , KB8106 , KBT2126 Overflow Covers: EVF1116 Plumbing Trim Kits: KPK106P P-Traps: CC1186 , CC2186 , CC5186 , CC6186 , CC7186 , CC8146 , CC9186 , DD8106 , DD8406 Tailpieces: EVP1006 -
$1,095.85Dreyfuss KVPB2522711 25-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Polished Chrome
Kingston BrassView Description
Dreyfuss KVPB2522711 25-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Polished Chrome With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6001 , KB3001 , KB5001 , KB6001 , KB8101 , KBT2121 Overflow Covers: EVF1111 Plumbing Trim Kits: KPK101P P-Traps: CC1181 , CC2181 , CC5181 , CC6181 , CC7181 , CC8141 , CC9181 , DD8101 , DD8401 Tailpieces: EVP1001 -
$1,315.85Dreyfuss KVPB2522710 25-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Matte Black
Kingston BrassView Description
Dreyfuss KVPB2522710 25-Inch Ceramic Console Sink with Stainless Steel Legs (1-Hole), White/Matte Black With a beautiful ceramic counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. Solid ceramic sinks and tops like the LBT-series top in this listing are finished with a glossy glaze on the top and sink basin interior, making for a pristine, stain-resistant surface and glistening finish that is easily maintained. The underside and basin exterior are unglazed/unfinished and coated with a matte white protective sealant that prevents moisture absorption and staining. Solid ceramic pieces cannot be glazed on all sides, because the nature of ceramic material requires a minimum surface area be left raw during the glaze firing process so the piece does not explode. Also for your convenience, anti-slip rubber pads are included with the stainless steel legs to ensure steadiness. Water supply kit, drain assembly, and the faucet are sold separately. Features Item weight: 48.88 lbs. Fabricated from ceramic material for an everlasting glossy appearance Includes high quality stainless steel console legs Pre-drilled 1-hole for single hole faucet application Includes integral rectangular lavatory bowl Minimum cabinet size: 28-3/16" Overall dimensions: (L)25-3/16" x (W)22-1/16" x (H)34-1/4" Bowl dimensions: (L)18-1/8" x (W)12-5/8" x (D)4-1/2" 1-11/16" (42.86 mm) drain hole diameter Rear drain placement Does not include backsplash Rear overflow hole Topside of vanity top glazed glossy white Water supply kit and drain sold separately Professional installation recommended Includes mounting hardware and installation template Underside of vanity top unglazed, sealed with matte white protective coating Downloads Specification Sheet Parts Diagram Installation Guide Compatible Parts Compatible parts and components for this item. Please also ensure each selected additional item is compatible as appropriate. Drains: EV6000MB , KB3000 , KB5000MB , KB6000 , KB8100MB , KBT2120 Overflow Covers: EVF1110 Plumbing Trim Kits: KPK100MBP P-Traps: CC1180MB , CC2180MB , CC5180MB , CC6180MB , CC7180MB , CC8140 , CC9180MB , DD8100 , DD8400 Tailpieces: EVP1000 -
$280.00Dreyfuss VPB2218330H Console Sink Leg Wall Support, Matte Black
Kingston BrassView Description
Dreyfuss VPB2218330H Console Sink Leg Wall Support, Matte Black A simple minimalist support for your console sink legs, this leg wall support comes in a multitude of finishes that will bring out the shine in your bathroom. The Dreyfuss console sink leg wall support is constructed out of stainless steel and is designed for durability and reliability to last for years to come. Pair these leg wall support with Kingston Brass console sink leg support to combine as a complete console sink base, check model for compatibility. Features Front and wall support For wash basin pedestal VPB2218330 Includes 1 long and 2 short horizontal wall support arm Short arm length: 17-13/16" Long arm length: 20-3/16" Downloads Specification Sheet Parts Diagram Installation Guide
Bathroom Sinks Overview
Everyone deserves to experience nothing but pure joy and relaxation when using their bathrooms, but how do you get that exactly? Well with the best bathroom sinks, of course. By combining innovation and style together, Kingston has crafted the best bathroom sinks in the business and is eager for you to take a look at our best bathroom product. A bathroom sink may often be considered as nothing more than a place where your bathroom essentials sit, but they can be much more than that. A Kingston bathroom sink is constructed from the highest quality of material,... Read More
}
